1967 Doom Buggy by MattSlater
×
  1. MattSlater's Gallery
  2. 1967 Doom Buggy1967 Doom Buggy
DSC07240 This is the winter project a 1967 sand rail.
This is the winter project a 1967 sand rail.
The plexiglass windshield will be replaced with a real one.
The plexiglass windshield will be replaced with a real one.
Fuel tank brackets are just held together with sheet metal screws. The brackets will be rounded off
Fuel tank brackets are just held together with sheet metal screws. The brackets will be rounded off at the ends and bolted to the frame.
The oil cooler needs to be tilted up and an electric fan added.
The oil cooler needs to be tilted up and an electric fan added.
The grandchildren like it for a jungle gym
The grandchildren like it for a jungle gym.
The homemade shifter has to be replaced.
The homemade shifter has to be replaced.
The engine is torn down. Cylinders were honed the heads replaced due to heat cracks.
The engine is torn down. Cylinders were honed the heads replaced due to heat cracks.
Sludge in the oil strainer.
Sludge in the oil strainer.
Rebuilt engine with shiny new heads being lowered into place.
Rebuilt engine with shiny new heads being lowered into place.
The ball joints were still good but the rubber boots were cracked and torn.
The ball joints were still good but the rubber boots were cracked and torn.
While waiting for the front end parts to show up, the beam was stripped.
While waiting for the front end parts to show up, the beam was stripped.
This is the new color the girls picked out. Note the ugly headlights are gone.
This is the new color the girls picked out. Note the ugly headlights are gone.
Headlights and bumper installed. Still waiting on front seals.
Seals finally arrived,all new ball joints and bearings installed
Time to run new wiring
DSC07342
DSC07240  This is the winter project a 1967 sand rail. The plexiglass windshield will be replaced with a real one. Fuel tank brackets are just held together with sheet metal screws. The brackets will be rounded off The oil cooler needs to be tilted up and an electric fan added. The grandchildren like it for a jungle gym The homemade shifter has to be replaced. The engine is torn down. Cylinders were honed the heads replaced due to heat cracks. Sludge in the oil strainer. Rebuilt engine with shiny new heads being lowered into place. The ball joints were still good but the rubber boots were cracked and torn. While waiting for the front end parts to show up, the beam was stripped. This is the new color the girls picked out. Note the ugly headlights are gone. Headlights and bumper installed. Still waiting on front seals. Seals finally arrived,all new ball joints and bearings installed Time to run new wiring DSC07342
Scroll To Top

Audio Mute
Prev
Play
Next
Shuffle
Include